The Shop Floor App
The shop floor app (/floor) is a simple screen built for operators at the machine, usually on a tablet. It shows only the work that matters to you, lets you start, pause and finish operations, log the parts you make, and shows the drawing. It never shows prices or costs.
Prerequisites
- A Forge account. Operators with the default Operator role go straight to the shop floor app when they sign in, and opening the dashboard sends them back there.
- Jobs released to production, with operations assigned to you or to the machine you work on. See Releasing to Production.
Signing in as an operator
A manager creates your account in Settings → Team → Add member. They can either send you an email invite, or tick Set a password instead of emailing an invite, choose a password and tell it to you. Sign in on the login page with your email and that password.
Other team members (managers, programmers) open the app with the Shop floor link in the sidebar, and get back with Back to office in its header.
If a member forgets their password, a manager can set a new one from Settings → Team (see Team & Account).
If your company's subscription is not active, you'll see a "Subscription inactive" notice asking you to contact your administrator.
Choosing your machine
Use the EN / FR switch in the header to choose your language. Forge saves it to your account, so the app opens in that language on any tablet you sign in to.
Use the Machine selector in the header to pick the machine you're working on. Forge remembers your choice on that device, so a tablet mounted at a machine keeps showing that machine's work. Choose No machine to see only the operations assigned to you.
Your queue
The queue is split into groups:
- Mine — operations whose current phase is assigned to you.
- Up next — operations where you're assigned to a later phase. They're dimmed until it's your turn.
- On my machine — operations on the machine you selected whose current phase is assigned to someone else, or to nobody.
Each row shows the job number, the part number, the phase, how many parts are done out of the total (for example "3 / 10 parts") and the due date. An operation that is on hold shows an ON HOLD badge and can't be started.
Tap a row to open the operation.
Claiming an operation
Operations on your machine that nobody is assigned to have a Claim button. Tap it to make the current phase yours. If a coworker claimed it a moment before you, you'll see "Already claimed by" followed by their name, and the queue refreshes.
If your role doesn't allow claiming, those operations show Ask your supervisor to assign this instead of the button, and an unassigned operation you open can't be started until someone assigns it to you.
Running an operation
Open an operation to see its header (job, part number, revision, machine, quantity, good and scrap counts, due date) and three tabs: Operation, Drawing and Notes.
On the Operation tab:
- Tap Start followed by the phase name (Programming, Setup or Run). A timer starts, labelled "Time on" the phase.
- Tap Pause for a break, and Resume when you're back. Paused time isn't counted.
- Tap Finish followed by the phase name when the phase is done. Forge moves the operation to the next phase, or completes it after the run.
If something an operation depends on isn't ready (an earlier operation isn't finished, or material, a purchased item or an outside operation hasn't been received), Forge lists what's missing and asks Continue anyway? Choose Continue anyway to start, or Cancel. When an earlier step blocks the operation outright, the Start button is disabled and the reason is shown. If another operation is already active on the same machine, Start stays available but tapping it shows a message saying so, and the operation doesn't start.
If the current phase is assigned to someone else and you're a supervisor, you'll see Take over to assign it to yourself.
Offline: if the connection drops, a banner reads "Offline — reconnect to continue" and the buttons are disabled until you're back online.
Logging parts
During the Run phase, tap Log parts and enter:
- Good — parts that passed
- Scrap — parts that were thrown away
- Rework — parts that need to be reworked
- Note (optional) — anything the next person should know
Use the plus and minus buttons or type the numbers (up to 100,000 each; the note takes up to 500 characters), then tap Log parts. You can log as often as you like, for example after every pallet. If the connection drops while you tap, just tap again: Forge records the entry only once.
If the Good count is more than the parts still missing, Forge asks you to check it first, for example "You're logging 12 good; 7 remain. This will complete the operation." Tap Confirm to log it and complete the operation, or Back to fix the number.
When you tap Finish on the Run phase, Forge opens the same form with Good already filled in with the quantity still missing. Adjust it to the final count, then tap Finish. Forge logs the parts and finishes the operation.
An operation is complete when its good parts reach the quantity. Scrap and rework are recorded but never count toward completion, so scrapping a part means making another good one. When the operation completes, you return to the queue.
The drawing and notes
- Drawing shows the current revision of the part's drawing, with the revision label above it. PDFs and 3D files (STEP, STL) open in a viewer. Other file types show a link to open the file. If there's no drawing you'll see a message saying so.
- Notes shows the operation notes, the part notes and the work order notes, or "No notes for this operation." when there are none.
Tips
If a screen says an operation "changed", someone else updated it (for example a supervisor). Forge shows you its current state; just carry on from there.
Managers and supervisors still use the Production Board to reorder work and assign operators.
Related Articles
- Tracking Progress — phases, timers, part counts and completion
- Production Board — the office view of the shop floor
- Work Orders — how operations are structured